kw.\*:("Transformación isotérmica")
Results 1 to 25 of 111
Selection :
Carbon content of austenite in isothermally transformed 300M steelCHANG, L. C; BHADESHIA, H. K. D. H.Materials science & engineering. A, Structural materials : properties, microstructure and processing. 1994, Vol 184, Num 1, pp L17-L19, issn 0921-5093Article
Effects of CTBN on the cure characteristics of DGEBA/MDA/PGE-AcAm systemLEE, J. Y; CHOI, H. K; SHIM, M. J et al.Materials chemistry and physics. 1998, Vol 52, Num 3, pp 272-276, issn 0254-0584Article
Evaporation of liquids from cylindrical vessels under conditions of free concentrational convection in a gas phaseIZMAILOV, YU. G; PISAREV, N. M; VYATKIN, G. P et al.Journal of engineering physics and thermophysics. 1995, Vol 68, Num 3, pp 341-345, issn 1062-0125Article
Models for drying kinetics based on drying curves of slabsCOUMANS, W. J.Chemical engineering and processing. 2000, Vol 39, Num 1, pp 53-68, issn 0255-2701Article
Comparison of physico-chemical parameters of carbon black formation during hydrocarbons pyrolysis and furnace processTESNER, P. A; KUEHNER, G.Combustion science and technology. 1995, Vol 110/11, pp 551-554, issn 0010-2202Article
TTT curve nose predictionsKE HAN.Scripta metallurgica et materialia. 1993, Vol 29, Num 10, pp 1325-1328, issn 0956-716XArticle
The effect of the thermal path to reach isothermal temperature on transformation kineticsWIERSZYŁŁOWSKI, I. A.Metallurgical transactions. A, Physical metallurgy and materials science. 1991, Vol 22, Num 5, pp 993-999, issn 0360-2133, 7 p.Article
Cycle analysis for Stirling refrigerator with multiple expansion stages, perfect regeneration and isothermal processesWALKER, G.International journal of refrigeration. 1990, Vol 13, Num 1, pp 13-19, issn 0140-7007Article
Transition de phases dans un système modèle de disques dursZRYAKOV, I. N; FEDYANIN, V. K.Žurnal fizičeskoj himii. 1986, Vol 60, Num 2, pp 486-489, issn 0044-4537Article
Continuous cooling transformation kinetics versus isothermal transformation kinetics of steels : a phenomenological rationalization of experimental observationsJI-CHENG ZHAO; NOTIS, M. R.Materials science & engineering. R, Reports. 1995, Vol 15, Num 4-5, pp 135-207, issn 0927-796XArticle
Modelling of eutectoid transformation in plain carbon steel using kinetic equationsMUNIRAJULU, M; DHINDAW; BISWAS, A et al.Scripta metallurgica et materialia. 1994, Vol 30, Num 8, pp 1037-1041, issn 0956-716XArticle
Influence of carbon concentration and reaction temperature upon bainite morphology in Fe-C-2 Pct Mn alloysSPANOS, G; FANG, H. S; SARMA, D. S et al.Metallurgical transactions. A, Physical metallurgy and materials science. 1990, Vol 21, Num 6, pp 1391-1411, issn 0360-2133, 21 p.Conference Paper
The origin of annealing texture in a cold-rolled Incoloy 800H/HT after different strain pathsAKHIANI, Hamed; NEZAKAT, Majid; SONBOLI, Ali et al.Materials science & engineering. A, Structural materials : properties, microstructure and processing. 2014, Vol 619, pp 334-344, issn 0921-5093, 11 p.Article
Existence of solutions to an anisotropic phase-field modelBURMAN, Erik; RAPPAZ, Jacques.Mathematical methods in the applied sciences. 2003, Vol 26, Num 13, pp 1137-1160, issn 0170-4214, 24 p.Article
Isothermal solidification of Cu/Sn diffusion couples to form thin-solder jointsKANG, J. S; GAGLIANO, R. A; GHOSH, G et al.Journal of electronic materials. 2002, Vol 31, Num 11, pp 1238-1243, issn 0361-5235, 6 p.Conference Paper
Fractal fracture and transformation toughening in CuNiAl single crystalSHEK, C. H; LIN, G. M; LAI, J. K. L et al.Metallurgical and materials transactions. A, Physical metallurgy and materials science. 1997, Vol 28, Num 6, pp 1337-1340, issn 1073-5623Article
Isothermal precipitation of commercial 3003 Al alloys studied by thermoelectric powerLUIGGI, N. J.Metallurgical and materials transactions. B, Process metallurgy and materials processing science. 1997, Vol 28, Num 1, pp 125-133, issn 1073-5615Article
Mechanism of isothermal eutectoid transformation in high carbon stainless steelsTSUCHIYAMA, T; ONO, Y; TAKAKI, S et al.ISIJ international. 1997, Vol 37, Num 7, pp 715-720, issn 0915-1559Article
Microstructure of lower bainite formed at large undercoolings below bainite start temperatureCHANG, L. C; BHADESHIA, H. K. D. H.Materials science and technology. 1996, Vol 12, Num 3, pp 233-236, issn 0267-0836Article
Homogeneous formation of epsilon carbides within the austenite during the isothermal transformation of a ductile iron at 410 °CGUTIERREZ, I; ARANZABAL, J; CASTRO, F et al.Metallurgical and materials transactions. A, Physical metallurgy and materials science. 1995, Vol 26, Num 5, pp 1045-1060, issn 1073-5623Article
Effect of aluminum on the stability of the β-phase in β-titanium alloysMOISEEV, V. N; ANTIPOV, A. I.Metal science and heat treatment. 1995, Vol 37, Num 9-10, pp 378-382, issn 0026-0673Article
Thermal change in SnI2 thin films. II: Isothermal change without exposure to light radiationSAWADA, Y; SUZUKI, M.Thermochimica acta. 1994, Vol 232, Num 1, pp 37-45, issn 0040-6031Article
Maximum work from isothermal chemical enginesGORDON, J. M.Journal of applied physics. 1993, Vol 73, Num 1, pp 8-11, issn 0021-8979Article
Intercritically annealed and isothermally transformed 0.15 Pct C steels containing 1.2 Pct Si-1.5 Pct Mn and 4 Pct Ni. I : transformation, microstructure, and room-temperature mechanical propertiesSAKUMA, Y; MATLOCK, D. K; KRAUSS, G et al.Metallurgical transactions. A, Physical metallurgy and materials science. 1992, Vol 23, Num 4, pp 1221-1232, issn 0360-2133Article
Diffusion-controlled phase transformations in steels. Theory and applicationsKIRKALDY, J. S.Scandinavian journal of metallurgy. 1991, Vol 20, Num 1, pp 50-61, issn 0371-0459, 12 p.Article